Basic Info.
Product Description
Medium and Low Pressure Casing Liquid Silicone Rubber IOTA 7635
Product description:The product is a double component, leak-resistant electric marks of the formed liquid silicone rubber.
Product features:
· Low viscosity injection molding
· Excellent hydrophobic
· High leak resistant electrical marks, anti-fouling
· Anti-UV and ozone, anti-aging
Application field:Cold shrink terminal, cold shrink insulation pipe, middle joint and three finger set.
Product performance:
| ITEM | Standards | IOTA 7635 | IOTA 7645 |
| 1. Appearance | / | Gray | Gray |
| 2. Viscosity(A/B agent,mPa.s) | GB/T 5561-1994 | 600 | 600 |
| 3. Density(g/cm3) | DIN 53479 | 1.13 | 1.13 |
| 4. Hardness(JIS) | DIN 53505 | 35 | 35 |
| 5. Tensile strength(Mpa) | DIN 53504 | 8.5 | 8.5 |
| 6. Tear strength(KN /m) | ASTMD 624B | 30 | 30 |
| 7. Extension rate | DIN 53504 | 800 | 800 |
| 8. Volume resistivity | IEC60093 | 1.9×1014 | 1.0×1015 |
| 9. Dielectric constant | IEC60250 | 2.8 | 2.8 |
| 10. Loss factors | IEC60250 | 0.0016 | 0.0016 |
| 11. Leak proof | IEC60587 | 1A3.5 | 1A4.5 |
| 12. Dielectric strength | IEC60243 | 26 | 26 |
Storage conditions:sealed in a cool, dry vent.
Shelf life:six months.
Packing specifications:20kg/barrel; 200kg/barrel;
Note:
Application:
1.The tools for taking agents a and B should be distinguished from or wiped clean before use, so as to avoid the combination of the two resulting in local clots and not normal use.
2.In use, avoid contact with chemical compounds containing N, S, P and Sn, or cause unvulcanization or incomplete vulcanization.
Safe:
1.When applying the products, pay attention to labor protection wear, avoid warm burns during construction, and prohibit consumption.
2.Be careful with this product, pay attention to safety before and when using it. In addition, it should comply with the relevant national or local security regulations. (See corresponding MDS for detailed safety guidelines).
